Gas Heater Installation & Replacement in Alexandra

Need help with your gas heater in Alexandra? Whether it’s an installation or a repair, our licensed team handles it safely and according to all local regulations. Schedule a call with us to find out more.

Alexandra Gas Water Heater Installation Replacement Singapore
Alexandra Gas Water Heater Installation Replacement

🏢 CityGas Heater Replacement at Alex Residences, Alexandra (7 May 2024)

Why Alexandra residents choose gas heaters

If you live around Alexandra, many of the condominiums — including Ascentia Sky, Alex Residences, and The Metropolitan — were originally fitted with city gas-powered water heaters to supply multiple bathrooms. These wall-mounted systems are reliable and efficient, but after many years of use, older models often show signs of wear such as gas leak above 50ppm, heat exchanger corrosion and leaking water, burner rusty and choked, internal rust, or inconsistent ignition.

At Homeone, we specialise in EMA licensed gas heater replacement and testing for these condo systems. Every project includes gas leak inspection, Final pressure test for consumer’s internal pipes in residential premises at 450mm w.g. for 5 minutes. Ensuring your installation meets City Gas and PUB standards for continued safe use.

Every gas heater project in Alexandra is carried out with strict adherence to Singapore regulations:

Compliance & Certification

EMA LGSW PUB Compliant Gas Supply Reg. 21
  • PUB licensed plumber and EMA Licensed Gas Service Worker supervise every gas heater job.
  • Gas Supply Regulation 21 compliance — Final Pressure Test at 30 mbar & 6-inch water column.
  • Meets PUB requirements for gas valve, stop valve & fittings.
  • Statement of Gas Appliances Testing Certificate issued after every replacement.
All tests are documented and available for MCST submission on request.

Number of Gas Heaters installed Since 2000

🏢
In HDB Alexandra 42
🏢
In Alexandra Condos 57
🔥
Total Gas Heater Jobs in Alexandra 99

Recent gas heater projects: Alexandra (2025)

ALEX RESIDENCES (CONDO) 🏢

Internal Water Leaking and Corroded

This project at Alex Residences involved replacing an older Gas water heater powered by City Gas that is almost reaching end of its lifespan. The old unit showed visible corrosion on its copper pipes and fittings, which could eventually lead to leaks if left unattended.

Our team installed a new Macro gas water heater and upgraded the connecting pipes with fresh fittings to ensure a secure, long-lasting setup.

ASCENTIA SKY (CONDO) 🏢

Gas Heater Replacement due to Motherboard Melted, Control Panel No Display

The Gas water heater powered by City Gas, which had been in service for about 11 years, had become unsafe to operate. The motherboard was partially melted, several cable connections were rusted, and the control panel had stopped displaying readings. These faults were signs of long-term heat and moisture damage within the unit and indicated that it had reached the end of its usable life.

Our team replaced the old system and completed the installation in full PUB compliance, including leak testing and final pressure checks to ensure safe operation before handover.

QUEENS PEAK (CONDO) 🏢

Motherboard Melted, Control Panel No Display

We replaced an old Gas water heater powered by City Gas at Queens Peak, a condominium in Alexandra that had already reached the end of its service life. The heater showed signs of rust and corrosion on the copper piping, and the fittings were starting to leak.

A new Macro gas heater was installed with new piping and proper sealing to ensure a safe, lasting setup. All work was completed according to PUB and City Gas safety requirements, including full leak and pressure testing before handover.

Why choose Homeone for gas heater?

City gas logo

Over 15 years of experience working with CityGas heaters in condos across Singapore

EMA Licensed Gas Service Worker

EMA Licensed Gas Worker supervision for every project

Water heater repair pub submission compliance

PUB-Compliant testing & certification

Gas Heater Transparent Pricing

Transparent pricing with no hidden fees

🔥

Our Condo Gas Heater Services in Alexandra

Installation & Replacement

  • Supply and install Rinnai, Macro, and other City Gas–approved models
  • Safely dismantle existing or concealed heaters in condo service yards
  • Fit and align exhaust pipes to ensure proper ventilation and safe discharge
  • Complete PUB submission and carry out the final pressure test at 30 mbar

Repair & Troubleshooting

  • Restore ignition and burner performance for stable heating
  • Diagnose and clear error codes (E1, E2, E3) shown on the display
  • Replace worn parts — thermostats, wiring, or sensors — to extend lifespan
  • Stop gas or water leaks in connection joints before re-commissioning

Condo Safety Inspections

  • Perform gas leak checks using calibrated electronic detectors
  • Monitor carbon monoxide (CO) levels in enclosed service areas
  • Inspect exhaust pipe runs and confirm proper ventilation clearance
  • Ensure all stop valves and safety fittings meet PUB requirements

Gas Leak & Safety Response

  • Fast on-site support when leaks or strong gas smells are reported
  • Isolate and replace faulty sections, then retest the full gas line
  • Provide an official compliance certificate after successful pressure testing

Alexandra condo gas heater installs—clean work, pressure-tested to PUB and Reg. 21 before handover

FAQ – Frequently Asked Questions for Gas Heater in Alexandra

What are the common signs my Gas water heater needs replacement in Alexandra condos?
Most homeowners start noticing fluctuating water temperature, water dripping from the bottom of the unit, or a rusty gas pipe connection. If you also hear the heater struggling to ignite or see error lights flashing, it’s a good sign the internal parts are worn out and replacement is due.
How long does a gas heater replacement usually take?
A standard replacement in a condo service yard takes about three to four hours, including removal of the old gas heater, pipe reconnection, and a final pressure test. The actual timing depends on how the original heater was installed and the condition of the gas and water lines.
Will my new gas heater be compatible with existing Gas pipes?
In most cases, yes — the existing copper or stainless steel gas line can be reused after a leak test and valve inspection. If the fittings are outdated or corroded, we’ll replace them with new components to ensure full compliance and safety.
Why is professional installation important for Gas heater replacement?
Gas heaters rely on proper ventilation, gas pressure, and electrical isolation. A small mistake can lead to gas leaks or carbon monoxide buildup. That’s why every installation in Alexandra is carried out and tested to meet PUB and City Gas standards.