Ariston PRO RS 56S Water Heater Not Heating: Inspection and Repair at Sophia Hills – 12 November 2026
📍 5 Sophia Hill
1. Customer’s Complaint – Water Not Heating Up
The water heater was switched on, but no hot water was produced.
The heater switch indicator light was illuminated, but the water remained cold.
🏢 Condo🚿 Storage Water Heater✅ Compliant with Water Supply Regulations
2. Site Assessment
Confirmed that power was present at the water heater switch and that its indicator light was illuminated.
Found a burnt-out neutral pole in the isolator, bypassed using a 10A connector that was inadequately rated for the heater’s estimated 12.62A load at 230V.
Found that the water heater’s power cable was a BS 6500 three-core, 70-strand cable. The cable’s compliance with flame-retardancy standards, such as IEC 60332-1-1 and IEC 60332-1-2, could not be verified. The use of an inadequately rated or unsuitable cable for a high-power appliance, such as a storage water heater, may result in overheating, insulation damage, electrical tripping or potential fire hazards.
Confirmed that electrical power was present at the thermostat input during a light bulb test.
Measured a resistance of 18.22Ω across the heating element, indicating electrical continuity.
3. Repair
Replaced the burnt-out isolator connection with a new connection unit.
Replaced the faulty thermostat.
Advised the customer to replace the existing water heater power cable due to potential electrical safety concerns. However, the customer declined the replacement as the cable was still functioning and they intended to move out of the property. The customer was informed of the potential risks associated with continued use of an unsuitable cable.
4. Testing
Verified that the water heater operated and heated the water following the repairs.
Measured an outlet water temperature of approximately 40.2°C using a digital thermometer.
5. Result
Following the repairs, the water heater resumed normal heating operation and supplied hot water during the functional test
6. What to Do When Your Water Heater Is Not Heating Up
If your water heater is not producing hot water, we recommend the following precautions:
Stop using the heater if you notice a burning smell, sparks, unusual sounds or signs of electrical damage.
Do not open the heater or attempt electrical repairs yourself.
If water is leaking near electrical components, avoid touching the heater, switches or any wet electrical connections.
Contact Homeone for a site assessment to identify the cause of the fault and recommend suitable repairs. Call 8822 6770.